These fireflies are inspired by the original design, but are more simpler to set up and doesn't involve nearly as much electrical work. However the effect is not identical to the original firefly design, but different in it's own way.
Difficulty: Beginner hobbiest
Parts List
a black marker
cardboard
black string
a blacklight (preferrably a fluorescent black light)
either yellow or green fluorescent poster paint
electric fans
pencil
Building Instructions
First, decide how many fireflies you wish to make. (Preferrably no more than four per blacklight)
For every fly you wish to create, cut a piece of cardboard about 1" by 2".
Then color each of the pieces completely with a black marker on both sides.
After this, dot a small circle of paint onto one side of each of the cardboard pieces to represent the firefly.
Let dry.
Poke a hole at the top of the cardboard pieces with a pencil. Make sure the hole is on the longer side of the cardboard, so the cardboard is turned to look like a right-side-up rectangle when hung.
Tie the black string through the hole so it hangs about 3ft. or so for each fly.
Tie your flies in tree branches together but not too close so they will not tangle too easily. Be sure they are located
in a dark area at night.
Animate the flies with the use of hidden fans.
Use the blacklight to illuminate the fireflies. You may need to hide the blacklight
also. The blacklight will make the dots
glow but the string and cardboard should not be
visible.
Enjoy!
These fireflies probably look more
realistic since real fireflies use a "bioluminescence"
to give a soft glow. Blacklight gives an identical
glow effect when in contact with fluorescence. Actual
Fireflies usually glow a yellow or neon green.
Don't want to make them yourself? Order your own already made online
Where to next?